Exploratory Series

#1 I'll test it!

#2 Always up for some testing.

#3 Same with Me.

#4 Okay i am going to email everyone with the level right now. p.s. i haven't made the pic yet.

#5 Send it to asears16@yahoo.com please!

#6 Thanks to technostick, a screenshot has been taken.

#7 Its not bad, kinda poorly set up though.

#8 It's a nice level... I'm trying to get <1 min

#9 Agreed with ninja, but I also want sub 1 min, havent given it a go for it (I think I can do 30-40 seconds)

#10 Gah! failed. (I give up for the time being)

#11 Luca.harris@gmail.com

thanks.

#12 Beat it in 56.07 seconds. so 1 min is possible. but i think you can scratch that 30 second dream matan.

#13 I know :( I tried my best and could get a bad 48 seconds which I can improve by 3 or so seconds.

Looks better in my head than actual trials.

#14 Lol you guys are much better than me. My best is like 1 min 15 sec.

#15 First jump into the pipe, get the gem. jump and bounce slightly backwards to get the gem to the left of the pipe. then jump in to the half-pipe. try and jump in just off the edge on the pipe's side. continuesly jump in the pipe until you get out, this saves you the burden of trying to get the super speed. try and have around 15 second when you get the third gem. then get the super jump, use it, and land on the fourth gem. then turn around and go up that stair thing. when you get to the top, go left. jump to the 5th gem. then drop into the green pipe. jump toward the 6th gem to the far left turn thing in the marble-moto cross area. then go up the rampy thing for the 7th, and try and land on the 8th. then go left to the 9th and last gem. then quickly get back to the finish

I'd say 55 seconds is a nice gold time. because i just got 54.08 while reminding myself of the pathway.

#16 I have a question: How do you have gold times if you don't have boundaries? I had to delete the boundaries entirely because I didn't know how to make them bigger. Is it possible to make bigger boundaries?

#17 That came out wrong. What I meant to ask was how do you make boudnaries after you have already deleted them. And, how do you enlarge the boundaries.

#18 That came out wrong. What I meant to ask was how do you make boudnaries after you have already deleted them. And, how do you enlarge the boundaries.

#19 After accessing the level editor (F11) press F3 and then on the right bottom side of the screen:
Mission Objects -> Trigger

On the box that appears:
Click on deafultTrigger and in the menu that appears press below it choose InBoundTrigger
Choose a name to the trigger, eg: IBT

Now it's in front of you

Press F4, you should see all the things relevant to it:
SCALE - 1 1 1
Change it to other numbers bigger than one and the trigger becomes bigger. So 300 300 100 means 300 in X (horizontal) direction, 300 in Y (parallel to X - other horizontal) direction and 100 in Z (vertical) direction. Now press Apply and u have the boundary.

#20 Thanks Matan. I also made a few minor changes and if anyone else has any suggestions or anything, I will gladly take them. If not, I will look it over a couple more times and then finalize it.